High Speed Automatic Q195 / Q215 Steel Coil / Steel Slitting Lines Width 300mm-1250mm

High Speed Automatic Q195 / Q215 Steel Coil / Steel Slitting Lines Width 300mm-1250mm

CONTENT

1. Main Use

2 Technical process ( including the process drawing)

3. Equipment technic parameter confirmation letter

4. Equipment configuration

5.Foundation, installation and commissioning of the equipment

6. Matters for attention

7. The price and Q.T. of each component

8. Others

1. Main use

It is used to cut the steel coil to the rated width. It could cut kinds of metal coil with different blade and prepare the billet for next process ( such as rolling, welding pipe, cold bending and punching).

2. Technical process ( including the process drawing)

Stuff loading-uncoiling-traction delivery-cutting machine for head and tail of steel strip-front loop splint ( loop pit)-guide centraling-sliting line main machine-transition stuff guiding platform(edge wire pit)-edge wire coiler-back loop splint ( loop pit)-tension damp of pre stuff distribution-punching-coiler-unloading-production packin-

3. Equipment confirmation letter

Specification(raw material)

1. applicable materials:Common carbon cold rolled bright steel coil(such as Q195,Q215,Q235)
2. quality:domestic/imported certified products steel coil(meet JIS standard)
3. tensile strength:δb≤500Mpa,yield strength:δs≤250Mpa
4. thickness:0.45mm-1.4mm
5. width:300mm-1250mm
6. in-diameter:φ508mm
7. out-diameter:≤φ1500mm
8. weight:≤15T
9. products specifications :
   1. in-diameter:φ508mm
   2. out-diameter:≤φ1500mm
   3. coiled product weight:≤15
   4. slitting capability: 3-15 lines(when plate thickness 0.45mm-1.0mm)

2-10 lines(when plate thickness 1.01mm-1.4mm)

5. Width Tolerance: ±0.10mm(when thickness 0.45mm-1.4mm)

Note:when using new blade or after sharpening,parallelism and verticality≤0.005mm, as width of slitting plate is 1000mm-1250mm and JIS standard steel coil in 150T)

6, the min. width of production:

25mm(when plate thickness 0.45mm-1.4mm)

7. one side sliver width:≥3.0mm

Two sides should have slivers

other parameters:

1, sliting speed:about 0-80m/min(stepless speed regulation)

2, sliting type :active slitting

3, power:380V/50Hz/3ph(it could be determined by buyer)

4. config.:electrical panel 1set

Main control panel 1 set

Assitant control panel 2 sets

Portable button case 1 set

5. Production direction:by customer(face to machine)

left-in and right-out right-in

6, Plant area:about 22meter x 6meter

7, operator:main skilled operator 1-2persons, helper 2-3persons

note:Specific number of operators depends on actual situation of customer's

8, color:computer-gray and orange pattern(for export plant)

Remarks: all the above parameters is primary data only for reference. If buyer has any other requirement, please contact us to make the best proposal

Equipment configuration

equipment composition:

1. Hydraulic loading trolley 1set
2. single-cantilever hydraulic expansion/contraction material hanging uncoiled 1set
3. material hanging support 1set
4. automatic hydraulic pressure driving feeding machine 1set
5. leading terminal and shoveling terminal 1set
6. traction pinch initial correction machine 1set
7. steel strip head/tail shearing machine 1set
8. front looper pallet rack(looper pit) 1set
9. center directing and correcting device 1set
10. slitting host machine 1set
11. sliver rolling machine 1set
12. edge sliver coiler 1set
13. back looper pallet rack(looper pit) 1set
14. Pre-sub/pressing materials tension damping device 1set
15. Hydraulic slitting pressing device 1set
16. rolling host machine 1set
17. rolling support 1set
18. Hydraulic unloading trolley 1set
19. Hydraulic pneumatic system 1set
20. Electrical control system 1set

o